
A filtração confiável começa com especificações verificadas.
Separador ar/óleo 2906095500
Elemento de substituição de elementos do filtro do compressor de ar
Elementos de filtro compressor de ar
Oil application for sealing gaskets: Before installation, apply a thin layer of air compressor lubricating oil to the surface of the new O-ring or flange sealing gasket. This ensures smooth tightening
Os pedidos são confirmados por nossa equipe para preço, compatibilidade e entrega.
Especificações verificadas para uma seleção confiante.
Confirmar os requisitos de instalação em função do manual do equipamento ou da documentação original.
| Altura | 450mm |
|---|---|
| OEM / referência cruzada | 1623051599,1623051500 |
| Diâmetro externo | 399 mm |
| Diâmetro interno | 315 mm |
| Peso | 17.03kg |
| Precisão da filtração | 0,1 mm |
Aplicação de óleo para vedação de juntas: Antes da instalação, aplique uma fina camada de óleo lubrificante do compressor de ar na superfície da nova junta de vedação O-ring ou flange. Isso garante um aperto suave e melhora muito a estanqueidade, impedindo que a junta se desloque ou torça durante a compressão.
Vantagens Principais
• Pureza de escape ultra-elevada (remoção eficiente do óleo):
O elemento filtro adota fibra de vidro superfina composta multi-camada dentro, que pode coalesce eficiente mícron e submicron gotas de névoa de óleo. Após a separação, o teor de óleo do ar comprimido descarregado pode ser reduzido para uma faixa extremamente baixa de 1-3 ppm, evitando efetivamente a contaminação do oleoduto e protegendo os caros equipamentos de consumo de ar a jusante e componentes pneumáticos.
• Economia de energia notável e redução do consumo (desenho de baixa pressão):
O produto apresenta excelente permeabilidade ao ar com uma resistência inicial inferior a 0,02 MPa. Mantém uma queda de pressão extremamente baixa ao longo de sua vida útil. Isso significa que o motor do compressor de ar não precisa de trabalho extra para superar a resistência, reduzindo assim muito o custo de eletricidade da empresa durante a operação de longo prazo.
• Resistência à pressão de longa duração e proteção de segurança:
High-strength corrosion-resistant alloy steel is used for the frame and flange, combined with a patented anti-static conductive strip design. It can withstand abnormal pressure differential impacts up to 5 bar to prevent the filter element from collapsing, and can timely discharge static electricity generated by friction of high-speed airflow, completely eliminating the risk of combustion and explosion caused by static sparks inside the machine.
• Original one-stop kit (all-in-one package):
Supplied in the form of a maintenance kit. In addition to the main filter element, it is fully equipped with fluororubber O-rings and special high-temperature resistant sealing gaskets. It ensures that peripheral sealing parts can be replaced synchronously during each maintenance to achieve 100% air tightness and eliminate risks of air and oil leakage.
Notas de Instalação
Removal of the Old Oil Separator Core Remove external pipelines: Carefully detach the oil return pipe on the oil-gas barrel cover with a wrench (take care not to lose the sealing copper washer at the pipe end fitting). Remove control pipelines (such as the pipeline of the pressure maintaining valve, sensor cables and other components hindering disassembly). Remove barrel cover bolts: Use a socket wrench to loosen and remove the fastening bolts on the top cover of the oil-gas barrel one by one in a diagonal cross sequence. Take out the old oil separator: Lift the barrel cover vertically upward and remove it. Take out the old oil-gas separator core and the old sealing gaskets on both sides of the flange. Cleaning and inspection: Wipe the flange surface of the oil-gas barrel and the sealing groove of the top cover clean with a clean lint-free cloth (do not let foreign matter fall into the oil barrel). Pull out the copper tube of the oil return pipe, check whether the pipe end is worn and whether the beveled opening is unobstructed, and clean the oil return check valve.
Manutenção & amp; Substituição
Differential Pressure Alarm (Replace Immediately): When the control panel shows that the differential pressure across the oil separator element reaches 0.8 ~ 1.0 bar (approximately 12 ~ 15 psi), it indicates that the separator is severely clogged and must be replaced immediately; otherwise, it will cause motor overload and a sharp increase in energy consumption. Air filter element: Replace every 2,000 ~ 4,000 hours (traps dust and prevents the oil separator from premature clogging). • Oil filter element: Replace every 2,000 ~ 4,000 hours (removes impurities in oil to avoid screw rotor scratching and oil separator blockage). • Lubricating oil: Replace together with the oil separator every 4,000 or 8,000 hours (depending on whether semi-synthetic or fully synthetic oil is used).
Antes de encomendar
Confirme média, vazão, pressão, temperatura, conexão e espaço de instalação disponível.
Referência cruzada
Informações de referência associadas a este produto. Contacte-nos se precisar de ajuda para confirmar um número de referência cruzada.
Opções de entrega
Transporte ou ponto de serviço captador. Nossa equipe confirma o melhor arranjo baseado no destino, peso e tempo de liderança.
Confirmado antes da expedição
Após o inquérito, verificamos especificações, preço e status de fornecimento antes da entrega.
Suporte em andamento
Para questões de especificação, instalação ou qualidade, mantenha as informações do produto e da ordem disponíveis ao entrar em contato conosco.
INQUÉRITOEnviar uma pergunta para este produto
Send your requirements for 2906095500 and our selection team will confirm compatibility, price and lead time.
Recursos de seleção
Need help confirming 2906095500 or comparing it with another reference? Use these selection resources before ordering.



