
A filtração confiável começa com especificações verificadas.
Separador de óleo 5751500000@ @
Elemento de substituição de elementos do filtro do compressor de ar
Elementos de filtro compressor de ar
O conjunto separador óleo-gás 575150000P é uma peça de reposição de purificação de núcleo de alta eficiência especialmente projetada para compressores de ar de parafuso industrial Borg. Integrando um elemento filtrante de alto desempenho e
Os pedidos são confirmados por nossa equipe para preço, compatibilidade e entrega.
Especificações verificadas para uma seleção confiante.
Confirmar os requisitos de instalação em função do manual do equipamento ou da documentação original.
| Precisão da filtração | ≤ 0,1 μm |
|---|---|
| Diferença de pressão inicial | 0,02 MP |
| Temperatura máxima de funcionamento | 120 ℃ |
| Peso | 18,0kg |
| Altura | 598mm |
575150000P oil-gas separator assembly is a high-efficiency core purification spare part specially designed for Borg industrial screw air compressors. Integrating a high-performance filter element and a heavy-duty anti-corrosion metal housing, this product adopts an integrated spin-on/flange assembly structure. It is mainly installed on top of the oil-gas separator tank at the air compressor discharge end and serves as a critical component that determines the quality of the compressed air output and the lubricating oil consumption rate of the air compressor.
Vantagens do produto e recursos
• Ultra-high separation efficiency to guarantee clean gas supply
Adopting multi-layer precision composite materials, it achieves a filtration efficiency of up to 99.99% and strictly controls the oil content in exhaust gas within ≤ 3 ppm (parts per million). This effectively prevents lubricating oil from contaminating downstream air storage tanks, dryers and production line pipelines.
• Low pressure differential design for remarkable energy saving
Benefiting from the ultra-high porosity of imported high-quality filter media, it features extremely low initial resistance (≤ 0.02 MPa). It can maintain stable airflow throughout its service life and avoid power waste of air compressors caused by overcoming resistance.
• Original-equipment-grade heavy-duty structure with explosion-proof safety
Designed for a large exhaust volume of 23 m³/min, its housing and flanges are made of thickened anti-corrosion steel with high pressure resistance. A reliable static elimination device (equipped with static needles/conductive strips) is built into the assembly. It can completely eliminate static electricity generated by friction of high-speed airflow inside the filter element, preventing re-ignition or explosion inside the oil-gas barrel and ensuring safe 24-hour continuous industrial operation.
• Integrated quick-change design for extremely simple maintenance
This model is a complete original assembly (the total weight with housing is about 18 kg), different from conventional bare filter cores. For replacement, only the flange bolts need to be removed for integral swapping and installation. It delivers better sealing performance and greatly reduces factory downtime for maintenance.
Notas de Instalação
Inspection and Alignment of the Oil Return Pipe: ◦ Check the length of the oil return pipe (suction pipe). The clearance between the end of the oil return pipe and the bottom of the filter element shall be maintained between 2 and 3 mm. If the clearance is too large, the lubricating oil at the bottom cannot be sucked back to the main unit, which will cause severe oil carry-over (oil in exhaust) of the air compressor. ◦ Inspect and clean the check valve on the oil return pipe to ensure it is unobstructed. • Symmetrical Tightening of Flange Bolts: This assembly weighs 18 kilograms. The bolts must be tightened in a diagonal cross and gradual incremental sequence during installation. Do not fully tighten any single bolt in sequence at one time; otherwise, uneven stress will occur, resulting in minor local air leakage and oil leakage. Oil application for sealing gaskets: Before installation, apply a thin layer of air compressor lubricating oil to the surface of the new O-ring or flange sealing gasket. This ensures smooth tightening and greatly improves airtightness, preventing the gasket from shifting or twisting during compression.
Manutenção & amp; Substituição
Recommended maintenance interval: 3500 - 4000 hours. If the factory environment is dusty or conventional mineral oil is used, inspection or replacement is recommended in advance at 3000 hours to prevent frequent high-temperature shutdown of the unit caused by excessive oil separation pressure difference.
Antes de encomendar
Confirme média, vazão, pressão, temperatura, conexão e espaço de instalação disponível.
Opções de entrega
Transporte ou ponto de serviço captador. Nossa equipe confirma o melhor arranjo baseado no destino, peso e tempo de liderança.
Confirmado antes da expedição
Após o inquérito, verificamos especificações, preço e status de fornecimento antes da entrega.
Suporte em andamento
Para questões de especificação, instalação ou qualidade, mantenha as informações do produto e da ordem disponíveis ao entrar em contato conosco.
INQUÉRITOEnviar uma pergunta para este produto
Send your requirements for 575150000Р and our selection team will confirm compatibility, price and lead time.
Recursos de seleção
Need help confirming 575150000Р or comparing it with another reference? Use these selection resources before ordering.



