
A filtração confiável começa com especificações verificadas.
Separador de ar/óleo 55B29
Elemento de substituição de elementos do filtro do compressor de ar
Elementos de filtro compressor de ar
The 55B29 filter element (air-oil separator) is a high-efficiency coalescing air/oil separation device designed specifically for industrial screw air compressors.Multi-layer coalescing filter material
Os pedidos são confirmados por nossa equipe para preço, compatibilidade e entrega.
Especificações verificadas para uma seleção confiante.
Confirmar os requisitos de instalação em função do manual do equipamento ou da documentação original.
| Altura | 570 mm |
|---|---|
| Diâmetro externo | 482 mm |
| Diâmetro da flange | 604 mm |
| Maior Diâmetro Interior | 380 mm |
| Precisão de Filtração | ≤ 0,1 μm |
| Temperatura Máxima | 120℃ |
| OEM / referência cruzada | QX102271,QX104000,QX55829,CD 1902-C2,ZX-55B29,AX17658 |
O elemento filtro 55B29 (separador de ar-óleo) é um dispositivo de separação de ar/óleo de alta eficiência projetado especificamente para compressores de ar de parafuso industrial.
Estrutura de material filtrante coalescente multicamadas: A camada de filtro do núcleo interno é composta por fibra de vidro ultrafina (tipicamente fibra de vidro HV dos EUA ou fibra de vidro Lydall da Alemanha). Quando o fluxo de ar passa através do elemento filtro de dentro para fora (ou de fora para dentro), gotículas de óleo fino se coalescem em gotículas de óleo maiores após colisão com a fibra de vidro e caem no tanque de recuperação por gravidade.
• Thickened anti-corrosion metal frame: Both inner and outer frames adopt high-quality thickened stamped galvanized steel plates or stainless steel, featuring excellent compressive rigidity. The filter element will not collapse, deform or rupture even under instantaneous airflow impact or high pressure difference.
• Integrally formed large oil-sealed flange: A wide outer rim flange is equipped at the top, which delivers superior mechanical sealing performance and prevents any short-circuit air leakage at the junction between the oil-gas barrel and the filter element.
• Dual anti-static design: Special metal conductive strips (static pins) are fitted on the sealing gasket. This structure can promptly conduct static electricity generated by friction of high-speed airflow, completely eliminating the safety hazard of combustion and explosion inside the oil-gas barrel caused by static sparks.
Key Advantages and Value
• Extremely low pressure drop for energy saving: The initial pressure loss is controlled at ≤ 0.02 MPa. Lower resistance means the air compressor main unit does not need to consume extra electric power to overcome the resistance of the filter element, which can save enterprises a large amount of electricity costs during long-term operation.
• Ultra-long service life and reduced maintenance costs: With standardized maintenance and high-quality lubricating oil used, the designed service life can reach 4000 - 8000 hours, effectively extending the maintenance cycle of equipment and reducing the frequency of shutdown maintenance.
• Protection of downstream equipment: The oil-gas separation efficiency as high as 99.9% can greatly extend the service life of downstream precision filters (line filters) and adsorbents in adsorption dryers (such as molecular sieves and activated alumina).
Notas de Instalação
Since the 55B29 is a large filter element with a flange, details during installation directly determine its sealing performance and safety: • Electrostatic discharge (top priority): The 55B29 is equipped with metal conductive strips (static pins) on the flange gasket. Do not bend, cut off, or cover them with insulating gaskets during installation. It is mandatory to ensure the conductive strips make direct contact with the metal surface of the oil-gas barrel to dissipate static electricity generated by friction of high-speed airflow; otherwise, combustion and explosion inside the oil-gas barrel may easily occur. • Gasket and oil coating: The flange sealing gasket must be replaced simultaneously when replacing the filter element. A thin layer of clean air compressor oil can be applied to the surface of the gasket before installation to guarantee sealing performance during compression and prevent gas short-circuit leakage. • Diagonal tightening of flange bolts: When tightening the bolts of the oil-gas barrel top cover, tighten them in a diagonal cross pattern with gradual, multiple passes. This ensures even stress on the flange and avoids air leakage or gasket crushing caused by excessive stress on one side.
Manutenção & amp; Substituição
Initial pressure differential: After a new filter element is installed, the normal initial pressure differential is generally 0.15 - 0.2 bar (≤ 0.02 MPa). • Alarm and replacement threshold: When the pressure differential displayed on the panel reaches 0.8 - 1.0 bar (0.08 - 0.1 MPa), the system will normally trigger an alarm. Shutdown and replacement must be arranged immediately at this point. • Risks of extended operation: If the filter element is not replaced despite excessive pressure differential, the energy consumption of the air compressor will rise sharply as a minor consequence (power consumption increases by approximately 1% for every 0.1 bar rise in pressure differential). In severe cases, the filter element support frame may collapse or rupture under the pressure load, allowing a large amount of lubricating oil to flow directly into the downstream pipeline.
Antes de encomendar
Confirme média, vazão, pressão, temperatura, conexão e espaço de instalação disponível.
Referência cruzada
Informações de referência associadas a este produto. Contacte-nos se precisar de ajuda para confirmar um número de referência cruzada.
Opções de entrega
Transporte ou ponto de serviço captador. Nossa equipe confirma o melhor arranjo baseado no destino, peso e tempo de liderança.
Confirmado antes da expedição
Após o inquérito, verificamos especificações, preço e status de fornecimento antes da entrega.
Suporte em andamento
Para questões de especificação, instalação ou qualidade, mantenha as informações do produto e da ordem disponíveis ao entrar em contato conosco.
INQUÉRITOEnviar uma pergunta para este produto
Send your requirements for 55B29 and our selection team will confirm compatibility, price and lead time.
Recursos de seleção
Need help confirming 55B29 or comparing it with another reference? Use these selection resources before ordering.



