
A filtração confiável começa com especificações verificadas.
Air-Oil Separator B010454350
Elemento de substituição de elementos do filtro do compressor de ar
Elementos de filtro compressor de ar
Part number B010454350 (also commonly written as 010454350 or 10454350) is the oil-gas separator core for screw air compressor. Enquire about relevant information.Core Functions and Working Principle
Os pedidos são confirmados por nossa equipe para preço, compatibilidade e entrega.
Especificações verificadas para uma seleção confiante.
Confirmar os requisitos de instalação em função do manual do equipamento ou da documentação original.
| Precisão da filtração | 0,3 μm |
|---|---|
| Diâmetro externo | 300 mm |
| Diâmetro interno | 220 mm |
| Diâmetro exterior de flang | 355 mm |
| Altura | 600 mm |
| Queda de Pressão Inicial | 0,02 MP |
Part number B010454350 (also commonly written as 010454350 or 10454350) is the oil-gas separator core for screw air compressor. Enquire about relevant information.
Funções Principais e Princípio de Trabalho
This separator element adopts the "coalescence interception" principle:
1. Coarse separation: More than 90% of large oil droplets settle to the bottom of the oil-gas barrel through mechanical collision and gravity when entering the barrel.
2. Fine separation (function of this product): Air containing micron-sized oil mist passes through the special multi-layer composite glass fiber layer of the filter element.
3. Coalescence and recovery: Extremely tiny oil droplets are trapped and merge with each other when passing through the filter screen to form larger oil droplets. These droplets flow to the bottom of the filter element under gravity, are sucked back into the airend for recycling via the oil return pipe of the air compressor, and finally clean high-pressure air with almost no oil content is discharged.
Product Structure and Design Features
• Multi-layer stepped filtration: The internal filter media generally consists of a pre-filter layer, an ultra-fine fiber coalescing layer, a support layer and a separation layer. This multi-layer design not only improves filtration efficiency, but also gives the filter element an extremely high dirt-holding capacity.
• Heavy-duty reinforced metal frame: High-strength, corrosion-resistant perforated mesh or spiral lock-seam frame is adopted, featuring excellent pressure resistance and impact resistance. It can withstand high pressure differentials without deformation or rupture.
• High-temperature resistant special adhesive: Modified polyurethane or epoxy resin adhesive is used for high-strength bonding and curing between the end caps at both ends of the filter element and the central frame, ensuring no debonding or air leakage for long-term service under high-temperature (up to 120°C) and high-pressure conditions.
• Graphite anti-static gasket: Metal conductive pins (or conductive strips) are embedded in the attached sealing gasket. Static electricity is easily generated by the high-speed friction of oil and gas. This design conducts static electricity to the equipment for discharge, effectively preventing internal explosion and combustion inside the oil drum caused by static sparks.
Notas de Instalação
Earthing Safety: The metal shell of the barrel is equipped with an anti-static earthing conductive gasket (a metal conductive pin is usually fitted at the flange graphite gasket). Do not remove the conductive pin during installation; otherwise, electrostatic sparks may easily cause ignition inside the oil-gas barrel. 2. Seal Assembly: When replacing this model, be sure to replace its matching high-temperature and oil-resistant flange graphite gasket at the same time to prevent high-pressure air leakage or oil-gas side leakage.
Manutenção & amp; Substituição
Replacement signal: When the separator differential pressure (ΔP) displayed on the air compressor panel exceeds 0.08 - 0.1 MPa (0.8 - 1.0 bar), or obvious oil carry-over (abnormally increased oil consumption) occurs in the rear pipeline, replacement must be carried out immediately. An expired filter element will not only cause a substantial rise in energy consumption (for every 0.1 bar increase in differential pressure, the motor energy consumption increases by approximately 1%), but also bring risks such as the filter element collapsing or rupturing under pressure.
Antes de encomendar
Confirme média, vazão, pressão, temperatura, conexão e espaço de instalação disponível.
Opções de entrega
Transporte ou ponto de serviço captador. Nossa equipe confirma o melhor arranjo baseado no destino, peso e tempo de liderança.
Confirmado antes da expedição
Após o inquérito, verificamos especificações, preço e status de fornecimento antes da entrega.
Suporte em andamento
Para questões de especificação, instalação ou qualidade, mantenha as informações do produto e da ordem disponíveis ao entrar em contato conosco.
INQUÉRITOEnviar uma pergunta para este produto
Send your requirements for B010454350 and our selection team will confirm compatibility, price and lead time.
Recursos de seleção
Need help confirming B010454350 or comparing it with another reference? Use these selection resources before ordering.



