
A filtração confiável começa com especificações verificadas.
Filtro Separador de Óleo de Ar DB2167
Elemento de substituição de elementos do filtro do compressor de ar
Elementos de filtro compressor de ar
DB2167 is a high-performance externally wound air/oil separator core designed specifically for heavy-duty industrial screw air compressors. Developed and manufactured by Sotras, an Italian industrial
Os pedidos são confirmados por nossa equipe para preço, compatibilidade e entrega.
Especificações verificadas para uma seleção confiante.
Confirmar os requisitos de instalação em função do manual do equipamento ou da documentação original.
| Altura | 700 mm |
|---|---|
| Diâmetro externo | 299 mm |
| Diâmetro interno | 221 mm |
| Precisão da filtração | 10μm-15μm |
| Diâmetro exterior de flang | 355 mm |
| Diferença de pressão inicial | 0.15 - 0.25 bar |
| OEM / referência cruzada | O QUE É ISSO |
| Temperatura operacional | 120°C |
DB2167 is a high-performance externally wound air/oil separator core designed specifically for heavy-duty industrial screw air compressors. Developed and manufactured by Sotras, an Italian industrial filter manufacturer, it is mainly installed inside the air-oil tank of air compressors to thoroughly separate micron-sized lubricating oil mist mixed in compressed air, ensuring clean, oil-free compressed air for downstream gas consumption points.
Valores e Funções do Núcleo
• Ensure Air Purity: Control the residual oil mist in compressed air within an extremely low range of 1 - 3 ppm to protect downstream high-precision filters, dryers and pneumatic equipment from oil contamination.
• Reduce Lubricating Oil Consumption: Adopt an extremely efficient coalescing recovery mechanism, so that the separated lubricating oil can flow back to the airend for recycling, greatly cutting the maintenance cost of frequent oil refilling.
• Lower System Energy Consumption: Feature an optimized structural design with an initial pressure drop of only 0.15 - 0.25 bar. Low resistance means the air compressor consumes less electric power when discharging the same air volume.
Notas de Instalação
Anti-static (gasket grounding): DB2167 is normally equipped with graphite gaskets fitted with conductive metal pins. Do not scrape off, misplace or omit these conductive pins/stainless steel sheets during installation. Ensure absolute metal contact between the metal housing of the separator core and the flange of the air compressor oil-gas barrel. Failure of static conduction can easily ignite the oil-gas mixture inside the barrel and cause a flash explosion of the unit. Check the oil return pipe: When replacing a new filter element, the oil return pipe inside the barrel must be inspected. ◦ Check whether the one-way valve of the oil return pipe is clogged. ◦ Adjust the length of the oil return pipe so that its end is 2 to 3 millimeters above the bottom groove of DB2167. If it is too high, it cannot suck the accumulated oil at the bottom and will cause oil leakage; if it is too low, it will press and puncture the bottom of the filter element.
Manutenção & amp; Substituição
The initial pressure difference after installing a new filter element is usually 0.15 - 0.25 bar. ◦ When the oil separation pressure difference displayed on the control panel reaches 0.8 - 1.0 bar, it indicates that the filter element is significantly clogged and replacement should be prepared. ◦ Limit replacement point: The pressure difference must never exceed 1.2 bar. If this value is exceeded, the filter element risks being ruptured or crushed by high-pressure airflow at any time. The normal operating temperature should be maintained at 80°C - 95°C. ◦ The machine is strictly prohibited from running at a high temperature above 100°C for a long time; otherwise, it will accelerate the aging of the epoxy resin adhesive and sealing gaskets inside the separation core, resulting in premature oil leakage.
Antes de encomendar
Confirme média, vazão, pressão, temperatura, conexão e espaço de instalação disponível.
Referência cruzada
Informações de referência associadas a este produto. Contacte-nos se precisar de ajuda para confirmar um número de referência cruzada.
Opções de entrega
Transporte ou ponto de serviço captador. Nossa equipe confirma o melhor arranjo baseado no destino, peso e tempo de liderança.
Confirmado antes da expedição
Após o inquérito, verificamos especificações, preço e status de fornecimento antes da entrega.
Suporte em andamento
Para questões de especificação, instalação ou qualidade, mantenha as informações do produto e da ordem disponíveis ao entrar em contato conosco.
INQUÉRITOEnviar uma pergunta para este produto
Send your requirements for DB2167 and our selection team will confirm compatibility, price and lead time.
Recursos de seleção
Need help confirming DB2167 or comparing it with another reference? Use these selection resources before ordering.



